Rice-lake 880 Performance Series Indicator/Controller Operat Instrukcja Użytkownika Pobierz pdf (Strona 10)

Introduction 6

1.4 Indicator Operations

Basic 880 operations are summarized below:

1.4.1 Toggle Gross/Net Mode

1. Press to toggle the display mode between gross and net.

Net mode is available when a tare value has been entered or acquired,

(NET = GROSS minus TARE). If tare has not been entered or acquired, the

display remains in gross mode. LEDs next to Gross or Net indicates the

current mode.

1.4.2 Toggle Units

1. Press to switch between primary and secondary units. The current

units LED will be lit.

1.4.3 Zero Scale

1. In gross mode, remove all weight from the scale and wait for the LED

to light.

2. Press . The LED lights to indicate the scale is zeroed.

The scale must be stable and within the configured zero range, for the

scale to be zeroed. If the scale cannot be zeroed, NOZERO will display.

1.4.4 Acquire Tare

1. Place container on scale and wait for the LED to light.

2. Press to acquire the tare weight of the container. Net weight is

displayed and the T LED lights to show the tare value was entered.

1.4.5 Remove Stored Tare Value

1. Remove all weight from the scale and wait for the LED to light.

2. The display should read zero and the LED should be lit, zero the

scale if needed.

3. Press (or, in OIML mode ). Display shifts to gross weight

and the Gross LED is lit.

If keyed tare is allowed, press to open the keyed tare prompt. To

clear the tare press again.

GROSS

NET

B/N

Note

UNITS

ZERO

Note

TARE

ZERO

Note

TARE

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Brak uwag

Rice-lake 880 Performance Series Indicator/Controller Operat Instrukcja Użytkownika Strona 10